CATDOLL : Sow B-ultrasound machine operation guide: detailed explanation of pregnancy test startup steps

In the modern pig farming industry, sow reproductive management is crucial. As an efficient and non-invasive detection tool, B-ultrasound machine is widely used in sow pregnancy detection. However, many people may be confused about how to turn on and operate the machine before using it. This article will explain in detail the startup steps and basic operating skills of the sow B-ultrasound machine to help you better perform sow pregnancy detection.

1. Basic structure and function of B-ultrasound machine

Before understanding the startup steps, we first need to be familiar with the basic structure and functions of the B-ultrasound machine . Generally speaking, the B-ultrasound machine includes the following main components:

• Display screen : used to display the detection image in real time.
• Probe : Used to transmit and receive ultrasonic waves to detect the pregnancy status of the sow through different frequencies.
• Operation panel : used to adjust the display and control equipment.
• Power button : used to turn the machine on and off.

2. Steps for starting the sow ultrasound machine

The following are the detailed steps for starting the sow B-ultrasound machine for pregnancy testing:

1. Preparation

Before starting the machine, make sure the following preparations have been completed:

• The device should be placed on a stable table to avoid vibration.
• Make sure the probe and power cord are not damaged and are tightly connected.
• Check the power socket to make sure it is plugged in correctly.
• Prepare enough ultrasonic coupling gel to form a good conductive medium between the probe and the sow's skin.

2. Power on operation

Once everything is ready, you can start the machine by following these steps:

1. Locate the power switch , usually on the right side or back of the device.
2. Press the power switch and wait for a few seconds. The device will automatically perform a self-check, the display will light up, and the initial screen will appear.
3. Once the device has completed the self-test, you will see the detailed operation interface. At this time, you can check whether the device is working properly.
4. Adjust the display brightness and contrast to view the inspection image clearly.
5. If the device displays an abnormal prompt, you can refer to the instruction manual to perform corresponding troubleshooting.

3. Set up the probe and conduct the test

After powering on, the next step is to set up and test the probe:

1. Residual bubble treatment

Before using the probe, ensure that an appropriate amount of ultrasonic coupling agent is evenly applied to the probe surface to prevent air bubbles from affecting signal transmission.

2. Use of probe

Gently place the probe on the sow's abdomen, paying attention to the adjustment of the angle and position. Generally speaking, placing the probe in the appropriate abdominal area of ​​the sow can improve the accuracy of detection:

• It is recommended to start from the side of the sow and choose a suitable position.
• Gently move the probe to find the best area for visualization.
• Be careful not to apply too much pressure that could cause discomfort to the sow.

4. Determine pregnancy status

When using a B-ultrasound machine for testing, the waveforms and images displayed will help you determine the sow's pregnancy status. Generally speaking, pregnant sows will have specific characteristic images on their abdomen:

• The gestational cyst in pregnant sows usually appears as a dark shaded area.
• Differences can be observed for multiple or single births.
• Regular testing can help monitor changes in sows during pregnancy.

5. Precautions and maintenance

When using the sow B-ultrasound machine , be sure to pay attention to the following matters:

• After each use, the probe and device surface should be cleaned in time to extend the service life of the device.
• Regularly check the power cord and interface of the device to ensure they are safe to avoid potential safety hazards such as short circuits.
• Make sure to store the device in a dry, ventilated place to minimize the impact of moisture on electronic components.

Summarize

The use of sow B-ultrasound machine can effectively improve the management efficiency of the farm, help farmers to timely grasp the pregnancy status of sows, and is of great significance to improving the reproduction rate and reducing the breeding cost. Through the guidance of this article, I believe you have a deeper understanding of the start-up and operation of the B-ultrasound machine . If you encounter any problems during use, refer to the product manual or consult professionals to solve your confusion.

Thank you for reading this article. I hope this content can help you use the sow B-ultrasound machine to test pregnancy smoothly, making your breeding work more efficient and accurate.